A110

Photoelectric angle encoder A110 is a similar high end encoder to A90H, but with a solid shaft. It is able to produce up to 1.800.000 output pulses per revolution and can have a modification with a distance-coded reference mark.



Mechanical Data

Number of output pulses per revolution 18000-1800000 ppr
Line number on disc (z) 18000
Reference signal

- standard: 1 per shaft revolution
- distance coded: 36 per shaft revolution
Maximum shaft speed 5000 rpm
Maximum shaft load

- axial: 10 N
- radial: 10 N
Accuracy ± 7.5 arc. sec; ± 5.0 arc. sec
Starting torque at 20°C ≤ 0.01 Nm
Rotor moment of inertia < 20x10-6 kgm2
Protection (IEC 529) IP64
Maximum weight without cable 0.7 kg
Operating temperature 0...+50°C
Storage temperature -30...+80°C
Maximum humidity (non-condensing) 98%
Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
Permissible shock (11 ms) ≤ 300m/s²
   

Electrical Data

Version A110-A ∫ 11 µApp A110-AV ∫ 1 Vpp A110-F Π TTL
Supply voltage + 5 V ± 5 % + 5 V ± 5 % + 5 V ± 5 %
Max. supply current (without load) 80mA 120 mA 120 mA
Light source LED LED LED
Incremental signals

Two sinusoidal I1 and I2
Amplitude at 1 kΩ load:
- I1 = 7 - 16 µA
- I2 = 7 - 16 µA

Differential sine +A / -A and +B / -B
Amplitude at 120 kΩ load:
- A = 0.6 - 1.2 V
- B = 0.6 - 1.2 V

Differential square-wave U1 / U1 and U2 / U2. Signal levels at 20 mA load current:
- low (logic "0") ≤ 0.5 V
- high (logic "1") ≥ 2.4 V

 

Reference signal

One quasi-triangular I0 peek per revolution. Signal magnitude at 1 kW load:
- I0 = 2 - 8 µA (usable component)

One quasi-triangular +R and its complementary -R per revolution. Signals magnitude at 120 W load:
- R = 2- 8 V (usable component)

One differential square-wave U0 / U0 per revolution. Signal levels at 20 mA load current:
- low (logic "0") < 0.5 V
- high (logic "1") > 2.4 V

 

Maximum operating frequency

(-3 dB) ≥ 160 kHz

(-3 dB) ≥ 180 kHz

(160 x k) kHz, k - interpolation factor
Direction of signals I2 lags I1 for clockwise rotation (viewed from shaft side) + B lags + A in clockwise rotation (viewed from shaft side) U2 lags with U1 in clockwise rotation (viewed from shaft side)
Maximum rise and fall time - - < 0.5 μs
Standard cable length 1 m; without connector 1 m; without connector 1 m; without connector
Maximum cable length 5 m 25 m 25 m

Accessories

Drawings

Typical Applications

           
       
           
           

Order Form